International Journal of Frontiers in Engineering Technology, 2025, 7(2); doi: 10.25236/IJFET.2025.070212.
Zhentao Wang, Jingmin Dai
School of Instrumentation Science and Engineering, Harbin Institute of Technology, Harbin, China
Thermal radiation damage is an important aspect of the comprehensive evaluation of explosives. Continuous enhancement in explosive performance and the development of various new weapons and ammunition have recently raised interest in assessing the thermal radiation damage effects induced by explosive fireballs. The thermal radiation damage threshold is a core parameter that directly influences the assessment of explosive performance and weapon design. However, current calculation methods only lead to single-point thermal radiation damage thresholds at specific distances from a fireball, failing to reflect the spatial distribution characteristics of thermal radiation damage, which constrains the applicability of the thermal radiation damage threshold parameter for the optimization of explosive performance and the development of weapons and ammunition. The paper calculates the spatial thermal radiation damage threshold based on the true temperature field of explosive fireballs, fully accounting for the spatial distribution characteristics of fireballs and the time-dependent nature of spectral emissivity. This research provides a solid theoretical foundation for the comprehensive evaluation of thermal radiation damage effects.
Thermal radiation damage, true temperature field, explosive fireballs
Zhentao Wang, Jingmin Dai. A Method for Calculating Spatial Thermal Radiation Damage Thresholds Based on the True Temperature Fields of Explosive Fireballs. International Journal of Frontiers in Engineering Technology(2025), Vol. 7, Issue 2: 84-95. https://doi.org/10.25236/IJFET.2025.070212.
[1] R Shi, G Fang, C Qiao, et al. Investigation into the gel substrate fabrication of a novel ammonium amine explosive and its generic properties exploration [J]. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2024, 682: 132918.
[2] L Zhang, X Li, S Wang, et al. Facile energetic fluoride chemistry induced organically coated aluminum powder with effectively improved ignition and combustion performances[J]. Journal of thermal analysis and calorimetry, 2023, 148(13): 5957-5966.
[3] YR Li, H Ren, XZ Wu, et al. Estimating energy release performance of oxidizer-activated aluminum fuel particles under ultrafast stimulus[J]. Defence Technology, 2023, 23(5): 92-99.
[4] YK Wang, CG Zhu, D Liu.Effect of Al–Mg–Mn Alloy on the Ignition Performance of RDX, HMX and CL-20[J]. Science of Advanced Materials, 2022,14(2): 350-360.
[5] AF Roberts. Thermal radiation hazards from releases of LPG from pressurised storage[J]. Fire Safety Journal, 1982, 4(3): 197-212.
[6] SB Dorofeev, VP Sidorov, AA Efimenko, et al. Fireballs from deflagration and detonation of heterogeneous fuel-rich clouds[J]. Fire Safety Journal, 1995, 25(4): 323-336.
[7] RW High. The Saturn Fireball[J]. Annals of the New York Academy of Sciences, 1968, 152(1): 441-451.
[8] WE Baker, AP Cox, PS westine, et al. Explosion hazards and evaluation[M]. Elsevier: Elsevier Science Pub Co, 1983.
[9] Martinsen W E, Marx J. An imprvoed model for the prediction of radiant heat rom fireballs[C]//1999 International Conference and Workshop on Modeling Consequences of Accidental Releases of Hazardous Materials San Francisco, 1999.
[10] Goroshin S, Frost D L, Levine J, et al. Optical pyrometry of fireballs of metalized explosives[J]. WILEY-VCH Verlag GmbH & Co. KGaA, 2006, 31(3): 169-180.
[11] MD Tarasov, II Karpenko, VA Sudovtsov, et al. Measuring the brightness emperature of a detonation front in a porous explosive[J]. Combustion, Explosion, and Shock Waves, 2007, 43(4): 465-467.
[12] JM Densmore, BE Homan, MM Biss, et al. High-speed two-camera imaging pyrometer for mapping fireball temperatures[J]. Applied Optics, 2011, 50(33): 6267-6271.
[13] Cole Ritchie, Steven W Dean, Kevin L McNesby, et al. Thermal behavior of explosive fireballs as a function of charge size[J]. Research article, 2024, (1): 1:8.
[14] JA Vílchez, M Muñoz, JM Bonilla, et al. Configuration factors for ground level fireballs with shadowing[J]. Journal of Loss Prevention in the Process Industries, 2018, (51): 169-177.
[15] Wang K , Liu Z , Qian X ,et al.Comparative Study on Blast Wave Propagation of Natural Gas Vapor Cloud Explosions in Open Space Based on a Full-Scale Experiment and PHAST[J].Energy & Fuels, 2016, (30): 6143-6152.
[16] ZT Wang, JM Dai. Multi-spectral radiation thermometry based on the reconstructed spectral emissivity model[J]. Measurement, 2024,(288):114346.
[17] Pani KR. LNG fires: A review of experimental results, models and hazard prediction chanllenges[J]. Journal of Hazaedous Materials, 2007, (140): 444-464.
[18] ZT Wang, JM Dai, Yang S. The development of a multispectral pyrometer for achievable true temperature field measurements of the explosion flame[J].Measurement Science & Technology, 2023, (34): 065501.