Academic Journal of Materials & Chemistry, 2025, 6(3); doi: 10.25236/AJMC.2025.060310.
Liye Xie1, Xueyan Jiao1,2
1School of Naval Architecture and Port Engineering, Shandong Jiao Tong University, Weihai, Shandong Province, 264209, China
2Jinma Industrial Group Co., Ltd All Rights Reserved, Rizhao, 276800, China
Tensile tests at elevated temperatures were performed on the Ti-22Al-24Nb-0.5Mo alloy using an MTS universal testing machine to investigate its hot deformation behavior. The experiments were conducted at temperatures ranging from 875 to 950 ℃ and strain rates of 0.001 to 0.55 s⁻¹. Flow stress-strain curves of the alloy were obtained under these conditions, and the effects of deformation temperature and strain rate on flow stress were analyzed. A fifth-order polynomial was used to model the relationship between strain and various material parameters, achieving a correlation coefficient (R) greater than 0.99. An Arrhenius type constitutive model with strain compensation was established. The calculated results demonstrated a correlation coefficient of 0.994 between the predicted and experimental flow stress values, with an average relative error of 4.24%. This confirms the model’s high accuracy, making it suitable for numerical simulations.
Ti-22Al-24Nb-0.5Mo; Hot Deformation Behavior; Arrhenius Model; Strain Compensation
Liye Xie, Xueyan Jiao. Study on Arrhenius Constitutive Model of Ti-22Al-24Nb-0.5Mo Alloy Based on Strain Compensation. Academic Journal of Materials & Chemistry (2025), Vol. 6, Issue 3: 71-78. https://doi.org/10.25236/AJMC.2025.060310.
[1] Li Baoyong. High temperature forming technology and equipment for lightweight structure of Ti-22Al-24Nb-0.5Mo alloy[D]. Harbin Institute of Technology, 2021.
[2] Liu Shishuang, Cao Jingxia, Zhou Yi, et al. Research and prospect of Ti2AlNb alloy[J]. The Chinese Journal of Nonferrous Metals, 2021, 31(11): 3106-3126.
[3] Yang Jianlei, Zeng Ting, Wang Guofeng, et al. High Temperature Deformation Constitutive Equation for Ti-22Al-25Nb Alloy Fabricated by Powder Metallurgy[J]. Hot Working Technology, 2019, 48(04): 43-47.
[4] Du Gang, Cui Linlin, Lei Qiang, et al. Research and Development of Orthorhombic Titanium Aluminide[J]. Materials China, 2018, 37(01): 68-73.
[5] Lin P, He Z, Yuan S, et al. Tensile deformation behavior of Ti-22Al-25Nb alloy at elevated temperatures[J]. Materials Science & amp; Engineering A, 2012, 556617-556624.
[6] Liu Q, Wang Z, Yang H, et al. Hot Deformation Behavior and Processing Maps of Ti-6554 Alloy for Aviation Key Structural Parts[J]. Metals, 2020, 10(6): 828.
[7] Paturi R M U, Narala R K S. Constitutive flow stress formulation for aeronautic aluminum alloy AA7075-T6 at elevated temperature and model validation using finite element simulation[J]. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2016, 230(6): 994-1004.
[8] Lin Y, Chen X. A critical review of experimental results and constitutive descriptions for metals and alloys in hot working[J]. Materials & amp; Design, 2011, 32(4): 1733-1759.
[9] Li Jingdan, Li Rongbin, Liang Hongyu. Modification of Constitutive Model of SA508-3 Steel Based on Strain Compensation[J]. Hot Working Technology, 2024, 53(11): 134-137.
[10] Wu Y, Wang D, Liu Z, et al. A unified internal state variable material model for Ti2AlNb-alloy and its applications in hot gas forming[J]. International Journal of Mechanical Sciences, 2019.
[11] Shi Wenpeng, Sun Cenhua, Li Jiajun, et al, 9310 Steel Constitutive Model Optimization Based on Artificial Neural Network Intelligent Algorithm[J]. Journal of Netshape Forming Engineering, 2024, 16(03): 171-180.
[12] Sellars C M, Mctegart W J. On the mechanism of hot deformation[J]. Acta Metallurgica, 1966, 14(9): 1136-1138.
[13] Rare Metals; Reports Outline Rare Metals Study Findings from Central South University (Hot Compression Deformation Behavior of Biomedical Ni-ti Alloy)[J]. Mining & amp; Minerals, 2019,
[14] Xia Yufeng, Jiang Wei, Cheng Qian, et al. Hot deformation behavior of Ti-6Al-4V-0.1Ru alloy during isothermal compression[J]. Transactions of Nonferrous Metals Society of China, 2020, 30 (01): 134-146.
[15] Li H, Mengwei L, Laixin S, et al. Study on hot deformation behavior of homogenized Mg-8.5Gd-4.5Y-0.8Zn-0.4Zr alloy using a combination of strain-compensated Arrhenius constitutive model and finite element simulation method[J]. Journal of Magnesium and Alloys, 2023, 11(3): 1016-1028.
[16] Lu Yupeng, Meng Lingjian, Yin Hongliang, et al. Constitutive Models for Tensile Deformation Behavior of Ti-22Al-25Nb Alloy Sheet at Elevated Temperatures[J]. Rare Metal Materials and Engineering, 2023, 52(03): 785-790.
[17] Zhou Feng, Wang Kelu, Lu Shiqiang, et al. Flow behavior and BP neural network high temperature constitutive model of Ti-22Al-24Nb-0.5Y alloy[J]. Journal of Materials Engineering, 2019, 47(08): 141-146.
[18] He Z, Wang Z, Lin P. A Comparative Study on Arrhenius and Johnson-Cook Constitutive Models for High-Temperature Deformation of Ti2AlNb-Based Alloys[J]. Metals, 2019, 9(2): 13.
[19] Zener C, Hollomon J H. Effect of Strain Rate Upon Plastic Flow of Steel[J]. Journal of Applied Physics, 1944, 15(1): 22-32.
[20] J. D, W. L C, Y. B C, et al. Arrhenius constitutive model of FV520B steel[J]. Metalurgija, 2024, 63(1): 93-96.